+86-135-43764945
Item name: tshirt small heat press machine
Machine Parameter:
Voltage: 220V, 110V;
Power: 1400W/1600W/2000W
Temperature Scope: 0-250C degree;
Time Scope: 0-999sec;
Printing Size: 38cm x 38cm(15"x15")/40cm x 50cm(16"x20")/40cm x 60cm(16"x24")
Package Dimension: 76X52X58cm/75X74X61cm
Weight: 32KG/37KG/38KG;
Product Features
1. The new, stylish, high-end styling, reasonable structure, operation easier;
2. Using intelligent digital display temperature controller, temperature control is accurate (+-1 C
degree)
3. Single-able integrated automatic temperature and electronic timing, the process is completed alert tone;4 The aluminum plate is a plate-like integrated heating, heat evenly, durable;
5. The heating plate is covered with high-temperature release layer, easy to clean, anti-oxidation;
6. Flexible silicone foam table laying temperature;
This machine use sublimation principle, can making various color photos, personality patterns,
heat transfer and other finished products to heat transfer onto cotton, hemp, chemical fiber, metal,
ceramics, glass and other flat material. Widely used to produce: Personalized Gifts easy to use,
advertising products, gifts and other operating
Usa Way:
1 Turn on the power switch, Power switch lights. Then can setting the working parameter.( Frist use,please setting temperature, Time, more details please read the instrucation of the control
panel time and temperature operation)
2 After setting the temperature、time,the machine starts to heat up heating (the temperature rose to
200 C degree and takes about 15 minutes)
3 Lifting the handle to make the machine open. Move the head to other sides, get the worktable, put
the products on worktable, testing the persure if is good. If not, need to adjust the pressure knob.
(Turn the knob clockwise to increase pressure, counterclockwise rotation to reduce pressure)
4 When the machine until desired temperature is reached, put the ;products on worktable, pressing
the handle, press the timer, after reaching the set time, the machine issued a warning tone,
lift the handle to complete the last operation;
Note:
1 If it is cool sublimation paper, printing completed. please waiting 15-20 seconds. Then tear it off. If it is heat sublimation paper, printing completed, please
tear off the paper asap (Diagonal grain to tear down the clothes). Successful printed, need right
time, temperature and pressure;
2 The final printed result depend on the products thickness,material and variety of sublimation paper.
3 different kinds of printing, please testing the sample. After get right time and
temperature, then volume production.
Simple Troubleshooting
1 Fault Phenomenon
Method: Judgement and treatment methods
2 Power Switch is turn on,but the light of machine is off;
Method: Power interface is not firm or the fuse of the power connector is burnout
3 Press knob is inflexible;
Method: Adding the lubricating oil on the rotary knob
4 Handlebar pressed down and get bumped ;
Method: Please adjust the pressure position screw to down
5 Handlebar is hard to lift;
Method: Please adjust the pressure position screw to up or counterclockwise to adjust the pressure
adjustment knob
6 Heat plate can not heating;
Method: Instrument failure or chassis of the relay does not work or heat board burned
tshirt small heat press machine actual pic:
