6080 manual heat press machine for T-shirt

6080 manual heat press machine for T-shirt 

manual heat press machine Parameter:

Item Name:  60x 80cm High pressure heat press machine

Item No.: UG-6080

Working Area: 60x80cm

Work Time: 0-999 secs

Working temperature: 0-220 Degree adjustable

Voltage: 110V/ 220V

Power: 3500W

Weight: 107kgs

Package size: 92x 92x53cm/90kgs

Apply:

This machine can printing any color or black and white images, text transfer to: ceramics, metal, glass, clothing and other material, widely used in shop business, transfer personalized items, clothing heat transfer purposes.

Product Features

1. The heating plate surface of Teflon paint, dust-proof, No need high temperature cloth;

2. Using intelligent digital display temperature controller, temperature control is accurate (+-10 C degree);

3. Pre-pressure adjustment unique way, the pressure be adjusted, convenient and flexible;

4 The digital display electronic timing, the process is completed automatically alert tone;

5. The cast aluminum heat plate, electric pipe and plate body cast as a whole, heat evenly, durable;

6. The surface is covered with high-temperature heat release layer, easy to clean, anti-oxidation;

7. Worktable laying temperature elastic silicone foam, can bear 400 C degree and does not distortion.

8 Matched 4 cm foam pad, better effect.

Instructions:

a)     Lift the handle so that the  machine is open.Put the target products on the working platform, testing pressure if is appropriate, and not,  need to adjust the pressure knob. (Turn the knob clockwise to increase the pressure, counter-clockwise to decrease pressure);

b)     Open the machine, ready to hot stamping products. (Heating process, please do not be stamping is placed on the working platform, in order to avoid bad roast)

c)     Turn the power switch on , temperature controller starting self-test, self-test for about 10 seconds to complete and enter the working state, then setting the working parameters (for the first time, set up the required:the temperature, time, see attached time and temperature instrument panel operating instructions)

After setting the temperature well, the time, the machine starts to heat up heating (the temperature rose to 200C degree takes about 15 minutes)

d)    When the machine until desired temperature is reached, will require the transfer of goods tile placed on a table, hand pressed, the machine starts automatic timing, after reaching the set time, the machine issued a warning tone, lift the handle to complete the last operation.

Note: For security reasons, the power supply must meet a protective ground wire single-phase three-wire power supply.